Janssen F Series, Operating Instructions Manual

Page: 251 / 315

23
3.3.1 Increase the distance between the knife
and the kneading roller:
If the biscuits are generally formed too thickly, the
distance between the knife and the kneading roller must
be increased so that the biscuits are cut thinner.
Absolutely necessary activity/procedure:
Step 1:
The dough must be removed from the kneading roller.
Step 2:
The locking screws on the axial bearing block must be
loosened so that the knife shaft can be brought into the
correct position in the axial bearing block.
Step 3:
The biscuit thickness setting of the
The knife must be set to the maximum
thickness.
Step 4:
It is absolutely necessary to adjust the knife shaft of the
knife using the blue knife distance gauge so that the knife
is at a defined distance from the kneading roller surface
at maximum biscuit thickness setting:
On the F250, the distance is 3.0 mm.
On the blue knife distance gauge is the number 3.0.
On the F450 and F600 the distance is 3.5 mm.
The blue knife distance gauge shows the number 3.5.
R
3,0
3,5
B
max.
Locking screws
axial bearing block
blue knife distance gauge
knife shaft
Knife holder
Knife