Janssen F Series, Operating Instructions Manual

Page: 33 / 315

31
3.6.2.1.2 "Settings"
From the "Main Menu" you can access the "Settings". Here
the three operating modes can be selected using the
buttons "Permanent", "Semi-automatic" and "Automatic"
and the respective function parameters can be set.
Explanatory information is available for all functions via
an "Info/Help" button (
).
(
Section "10.5 Operation/ "Performance" controller with
touch display/ programmable", p. 88
)
This figure shows the "Settings" screen with the automatic mode
selected
MENU
Settings
BACK
Permanent Semi-Auto. Automatik
Select program Save program
Mode:
Speed V1
maschine
m/min.
Program: 01 Spekulatius
4,0
i
Speed V2
upper conveyor belt
m/min.
4,0
i
Speed V3
sheet transport
m/min.
4,1
i
Knife
Level
1
i
Roller heating Level
0
i
Biscuit length
(measured)
mm
56
i
Biscuit position to the
front sheet edge
-
5
i
Factor for the
row spaces
-
14
i
Number of rows
-
12
i
Roller?
i
MENU
Settings
BACK
Permanent Semi-Auto. Automatik
Select program Save program
Mode:
Speed V1
maschine
m/min.
Program: 03 . . .
4,0
i
Speed V2
upper conveyor belt
m/min.
4,0
i
Speed V3
sheet transport
m/min.
4,1
i
Knife Level
1
i
Roller heating Level
0
i
Biscuit length
(measured)
mm
56
i
Biscuit position to the
front sheet edge
-
5
i
Factor for the
row spaces
-
14
i
Number of rows
-
12
i
Roller?
i
MENU
Settings
BACK
Permanent Semi-Auto. Automatik
Select program Save program
Mode:
Speed V1
maschine
m/min.
Program: 03 . . .
4,0
i
Speed V2
upper conveyor belt
m/min.
4,0
i
Speed V3
sheet transport
m/min.
4,1
i
Knife Level
1
i
Roller heating Level
0
i
Biscuit length
(measured)
mm
56
i
Biscuit position to the
front sheet edge
-
5
i
Factor for the
row spaces
-
14
i
Number of rows
-
12
i
Roller?
i
Speed V2
Upper Conveyor Belt
Notice:
With V2 you change the speed
of the upper conveyor belt.
V1 remains unchanged.
V3 adapts proportionally.
close
V3
V1
V2
Button for the
operating modes
“Info/Help" window
Selected programme
Setting value with
button for "
smaller" and "larger"