manualshive.com logo in svg

Janssen F Series, Operating Instructions Manual

Share
Download
Janssen F Series Operating Instructions Manual Download Page 158

156

12.7.5 Cleaning the  conveyor belt 

cartridge

To clean the upper conveyor belt 
cartridge, remove it. ( 

 Section "11.2.2 

Changing the conveyor belts of the 
conveyor belt cartridge"

)

Once you have removed the conveyor 
belt cartridge and removed the 
conveyor belt, you can clean the 
cartridge frame, the conveyor belt 
guide frame, and the conveyor belt 
separately.

Cartridge frame

Dough residues can build up on the 
deflection axle. Please clean this axis 
thoroughly after each shutdown. 

Frame for conveyor belt guide

You can clean the frame easily with 
rinse water and brushes. Please also 
clean the belt drive roller thoroughly 
with a medium-hard plastic brush, as 
dough residues can also be deposited 
here. 

Conveyor belt (plastic)

You can clean the plastic conveyor belt 
with rinse water. It is important that 
the belt be sufficiently dry before 
installation.

Conveyor belt (cotton)

The cotton conveyor belt can be 
cleaned with food-grade detergents at 
a maximum temperature of 30 °C. It is 
important that the detergent cleans 
effectively at this temperature. At 
higher temperatures the strip shrinks 
a good deal. 

Conveyor belt cartridge

Summary of Contents for F Series




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands