Jands HOG 1000, Operating Manual

Page: 120 / 126

114
••••
HOG – Version 3.20
Hardware Notes
MIDI Ports
There are three MIDI ports on the back of the HOG. MIDI In, MIDI Thru and MIDI Out. The connectors
are 180
o
5 Pin DIN type. They are wired as follows:
Pin 1 Not Used
Pin 2 Digital Ground
Pin 3 Not Used
Pin 4 Data +ve
Pin 5 Data -ve
Note: MIDI cables are wired 1:1 – purchase/make dedicated cables as audio cables may not work.
DMX-512 Ports
There are two DMX-512 Output ports on the back of the HOG. DMX-512 1 and 2 refer to the Output patch
listings 1 and 2 respectively. The connectors are 5 Pin XLR female panel sockets and are wired as follows:
Pin 1 Digital Ground
Pin 2 Data -ve
Pin 3 Data +ve
Pin 4 Not Used
Pin 5 Not Used
RS-485 Standard USITT DMX-512 Protocol
Desklight
2 ports are provided for desklights. A maximum load of 10 Watt @ 12 volts (2 x 5 Watt lamps) can be
connected to the console. The connector used is a 3 Pin XLR female socket and is wired as follows:
Pin 1 Not Used
Pin 2 0V
Pin 3 +ve (0-12V)
RS232 Serial Port
The RS232 serial port is used for connecting a mouse or trackball to the HOG. The connector used is a 9
pin male “D” Sub-Connector and is wired as follows:
Pin 1 Carrier Detect
Pin 2 Received Data
Pin 3 Transmitted Data
Pin 4 Data Terminal Ready
Pin 5 Ground
Pin 6 Data Set Ready
Pin 7 Request to Send
Pin 8 Clear to Send
Pin 9 Not Used