Maintenance Manual for J2 Sedan
Mechanical Part of Engine
46
③
Disconnect the locking clamp of intake hose, and then take off upper cover and intake hose.
■
Tightening torque: 6-9 N·m
④
Dismount the fixing bolt of air filter base, and
then take down the base.
■
Tightening torque: 8-12 N·m
2) Check after Dismantlement
Check whether there is any crack or wearing on the air duct assembly. If any, replace.
3) Installation
Install with steps contrary to dismantlement.
Attention:
■
Properly mount every joint and tighten the clamp.
3. Replacement of Air Filter element
1) Dismantlement
①
Loosen the lock clips of air cleaner upper
cover and lift the upper cover.
Fig. 1.1.012
Fig. 1.1.011
Fig. 1.1.013
Fig. 1.1.010
