Maintenance Manual for J2 Sedan
Mechanical Part of Engine
59
Attention:
■
Handle with care to avoid collision or damage.
⑦
Remove the camshaft from cylinder head.
2
）
Disassembly of balance shaft
On the basis of above-mentioned disassembly
procedure of camshaft, proceed as below:
Remove the bolts of balance shaft front end
cap and remove the balance shaft front end
cap.
①
■
Tightening torque for balance shaft front end
cap: 7.6±0.5N.m
②
Remove the balance shaft idler gear, remove
the bolts of balance shaft front gear, and
remove the balance shaft gear.
■
Tightening torque for bolts of balance shaft
front gear: 23.5±4.5N.m
③
Remove the bolts of exhaust bracket II and
balance shaft side cover and remove the
balance shaft.
■
Tightening torque for bolts of cover:
7.6±0.6N.m
Fastening bolts for exhaust pipe bracket II:
22.5±2.5N.m
Fig.1.1.037
Fig.1.1.036
Fig.1.1.035
