Maintenance Manual for J2 Sedan
Electrical Part of Engine
153
③
Stator
a. Inspect continuity between terminals.
■
If not, replace.
b. Grounding test
■
If electrically continued, replace the stator.
3) Assembly
①
Rear bearing
Attention:
■
The rear bearing can not be reused after being taken off. Please with new one.
■
Lubrication of rear bearing out race is not permitted.
②
Installation of rear cover
a.
Mount the carbon brushes assembly, adjuster
assembly and stator.
b. Push the carbon brushes with fingers to install them on the stator.
Attention:
■
Be careful to avoid damage of slip ring surface.
Fig. 3.2.025
Fig. 3.2.024
Fig. 3.2.023
Lead
Lead
Stator
core
