Maintenance Manual for J2 Sedan
Electrical Part of Engine
147
3) Assemblage
When assembling the starter, the bearing, the gear and the friction surface should be lubricated by
adding high temperature grease. And then conduct the following operations.
Gear clearance adjustment
①
■
Push the pinion out with the magnetic switch
energized, meanwhile check the clearance
between the pinion and the thrust piece with a
feeler.
■
If the clearance is out of range, adjust by
using spacer.
Fig. 3.2.015
Fig. 3.2.016
Adjusting gasket
Stop block
Gear clearance
Pinion
