Maintenance Manual for J2 Sedan
Service
28
Attention:
■
Tightening torques listed above are the standard values which are applicable for following
conditions:
a. Steel, plating nuts and bolts.
b. Plated steel plain washers.
c. All the dry nuts, bolts and gaskets.
■
The torques listed above are not applicable for following conditions:
a. When the component is to be tightened with spring or tooth washer;
b. Tightening of the plastic parts.
c. Self-tapping screw or self-locking nut.
d. Oiled thread and surface.
■
In following conditions, the torques listed above should be correspondingly reduced:
a. if a spring washer is used, the torque should be reduced to 85%.
b. If bolt surface is coated with oil, the torque should be reduced to 85%.
