Maintenance Manual for J2 Sedan
Service
8
Chapter II Service
Section I Service
I.
Preparation
1. Maintenance Tools
List of Maintenance Tools
No.
Tools
Outside View
Description
1
Power tool
For dismantlement and
installation of bolts and
nuts
2
Ignition plug
socket
For dismantlement and
installation of ignition
plug
II. General Service
General Service means the inspection and maintenance items which should be performed everyday
during normal use of vehicles. These service items are very important, for normal operation performance
of vehicle. The owners can perform these inspections by themselves, or go to a JAC franchised store for
assistance. Followed is content of general service:
1. Exterior of Vehicle
The following inspection and maintenance items should be frequently conducted.
List of Items to be Frequently Inspected for the Exterior of Vehicle
Item
Inspection
Tyre
Use an air gauge to inspect the pressure of tyres (including spare tyre) in the service
station regularly; adjust pressure in accordance with technical data if necessary. Check
whether there’s any damage, crack or excessive worn tear carefully.
Windshield
Clean the windshield regularly. Check whether there’s any crack or other damage of the
windshield every six months or more frequently. Repair as required.
Windshield
wiper blade
If the wiper doesn’t work efficiently, check for worn or torn.
Door and
engine hood
Check whether all of the doors, engine hood, boot cover and tail door can be normally
opened and closed normally, whether all the door locks are locked closely. Lubricate as
required. Moreover, If the vehicle often travels on the salt-spread roads or in the areas
with corrosive substances, always inspect lubricating conditions.
Tyre exchange The tyre exchange should be conducted after each 8000 km traveling.
