Maintenance Manual for J2 Sedan
Electrical Part of Engine
138
Section II Starting and Charging System
I.
Principle Diagram of Starting and Charging System
电动机
单向离合器
电磁开关
蓄电池
熔断片
起动机
充电指示灯
发电机
整流器
磁场绕组
定子绕组
点火开关
组合仪表
熔断片
中央电器盒
防盗继电器
低电平有效
起动继电器
接地
熔断片
Principle Diagram of Starting and Charging System
II.
Battery
1. How to use battery
Attention:
■
If the engine is necessary to be started with auxiliary battery and jumper wire, 12 V auxiliary
battery should be used.
■
When jumper wires are connected with battery, make sure that the jumper wires are clamped
to the terminals of battery and have good contact.
2. Methods to prevent excessive discharging of battery
The following precautions should be particularly emphasized to prevent excessive discharging of
battery.
■
Always keep surface of battery (esp. the top) clean and dry.
■
The connecting part of the terminals should be clean and tightened.
ETACS
－
low level effective
Anti-theft relay
Ignition switch
Central electric
box
Electric
generator
30 A fuse link
B
a
t
t
e
r
y
120 A
fuse
link
Combined
device
Magnetic
field
winding
Stator winding
Starter
Rectifier
Solenoid
switch
Charging
alarm light
One-way clutch
Electric
motor
20 A fuse link
Starting relay
Grounding