Maintenance Manual for J2 Sedan
Mechanical Part of Engine
123
6)
Disconnect the harness connector of fuel
pump and fuel pipe joint.
①
Fuel pipe joint of fuel pump
②
Harness connector of fuel harness
Disconnect the joint with following methods:
■
Hold the side edge of joint and press the raised position of joint to pull out the pipe.
■
If the joint sticks on the resin pipe, push and pull the joint for several times until it moves, and then
pull out the joint.
Attention:
■
The joint can not be disconnected until the raised position is fully pressed down. Do not
excessively distort the joint.
■
Do not disconnect the joint with any tool.
■
Prevent the resin pipe from being heated. Special attention must be paid when welding around
the resin pipe.
■
Prevent the resin pipe from contacting with acidic fluid such as electrolyte of battery.
■
Do not bend or distort the resin pipe during installation and dismantlement.
■
To keep the connection clean and prevent damage and foreign substance, please fully cover them
with plastic bag or equivalent.
7) Loose and take off the locknut with special
tool.
■
Tightening torque: 70-80N·m
Fig. 1.4.014
1
2
Fig. 1.4.013
