Maintenance Manual for J2 Sedan
Mechanical Part of Engine
35
3) Position sealant with the specified size.
■
Put the sealant into the groove for it (if any).
■
Generally, the sealant is put inside the bolt hole; however, it is occasionally put outside the bolt
hole.
■
Install the matching part in a certain period of time after applying sealant.
■
Eliminate any dirt from the sealant.
■
Do not re-tighten the bolts or nuts after installation in order to avoid failures of bolts or nuts.
■
Add engine oil and coolant 30min after the installation has been finished.
Attention:
■
Conduct the operation in accordance with the instructions specified in this manual.
Fig.1.1.003
