Iwatsu DS-8814, Operation Manual

Page: 26 / 141

7
[HELP] button : Displays an explanation of the currently selected function.
(P10). In remote mode, all buttons and knobs on the front panel are
disabled except for the [HELP].
DELAY
PERSISTENCE
SLOW FAST
ZERO DELAY
TIME/DIV
COARSE COARSE
[DELAY] knob
: Sets the trigger delay
time. (P16)
[ZERO DELAY] button : Set the trigger
delay time to zero. (P16)
[AUTOSET] button
: Automatically sets the vertical, horizontal
and trigger condition to show the input signal. (P12)
[PERSISTENCE] button : Sets overwrite ON or OFF. When ON, waveforms are
accumulated on the display. (P17)
[TIME/DIV] knob: Selects the sweep rate in 1-2-5 sequence. (P16)
When pressing this knob while FFT is being selected in the Display-Math menu, the
screen is changed to the FFT screen or YT/XY screen.
SAVE
(LOCAL)
FEED
UNDO
SAVE
CLEAR
[RUN/STOP] button : Sets capturing a new signal or stops capturing. The selected
condition is displayed at the top right of the screen. (P21)
[COPY] button : Outputs a hardcopy of the screen or setup condition to a
specified output device. (P24)
SETUP [SAVE] button : Saves the current setup to the internal memory.
(P26)
SETUP [UNDO] button : Recalls the saved setup from the internal memory.
Pressing the button again undoes the recalling and returns to the previous
setup. (P26)
REF [SAVE] button
: Saves the waveform data displayed on the screen to
the internal memory as a reference waveform. (P27)
REF [CLEAR] button : Displays the reference menu. Pressing the button
again erases all displayed reference waveforms. (P27)