Iwatsu DS-8814, Operation Manual

Page: 91 / 141

72
With ASCII save, the YT waveform data is saved with voltage values, and
therefore, when memory length is “Long”, cannot be saved onto a floppy disk
unless Step (data decimation) is 4 or greater. (Data can be saved to an ATA card
even when Step is 1.)
With a floppy disk, ASCII waveform data can be saved with file numbers from 1
to 200. With an ATA card, ASCII waveform data can be saved with file numbers
from 1 to 9999.
When long memory and step 4 are specified (1326 KB), it takes approximately 3
min. to save ASCII data to a floppy disk.
Memory length Trace On Step Data length File Size
Short CH1 to CH4 1 1024 bytes 54KB
Short CH1 to CH4 2 512 bytes 28KB
Short CH1 to CH4 4 256 bytes 14KB
Short CH1 to CH4 8 128 bytes 8KB
Short CH1 to CH4 16 64 bytes 4KB
Short CH1 to CH4 32 32 bytes 3KB
Short CH1 to CH4 64 16 bytes 2KB
Short CH1 to CH4 128 8 bytes 1KB
Long CH1 to CH4 1 102400 bytes 5301KB
Long CH1 to CH4 2 51200 bytes 2651KB
Long CH1 to CH4 4 25600 bytes 1326KB
Long CH1 to CH4 8 12800 bytes 664KB
Long CH1 to CH4 16 6400 bytes 332KB
Long CH1 to CH4 32 3200 bytes 166KB
Long CH1 to CH4 64 1600 bytes 84KB
Long CH1 to CH4 128 800 bytes 42KB
File count/size/storing time to a floppy disk