Iwatsu DS-8814, Operation Manual

Page: 104 / 141

85
Symptom
No triggering
Not possible to access
floppy disk or ATA card.
Paper jam of built-in
printer
Probe ratio is not set
automatically.
Waveform sways.
The time is not correct.
Panel setting when
power was turned OFF
is not restored when
power is turned ON.
Auto Cal cannot be
performed correctly.
Check item
Is a wrong trig signal selected?
Is the medium formatted?
Is the ATA card the one
recommended by Iwatsu?
When inserting roll paper, was the
end of paper placed properly against
the roller?
Is the roll paper the genuie one ?
Is the probe provided with a probe
sense function?
Did the AC power supply voltage
drop too much?
Did you set the time?
Action
Set the trig signal input
channel as the trig signal
source.
Format the medium using
Format in the SAVE/
RECALL menu.
Use the product
recommended by Iwatsu.
See our homepage or
contact your nearest our
sales office.
Cut the roll paper end
straight and insert it beneath
the roller.
Use the genuine roll paper.
Use the probe with a probe
sense function.
Use proper AC power supply
voltage.
Set the time with DATE in
the UTILITIES menu.
The built-in battery may be
aged. Contact our service
representative.
The built-in battery may be
aged. Contact our service
representative.
Perform Self Cal with all
input signals disconnected.