Iwatsu DS-8814, Operation Manual

Page: 45 / 141

26
SAVE/UNDO of SETUP
Saves the current panel setting in internal memory. The internal memory
stores the condition immediately before the last pressing of the button.
Recalls the saved setup from the internal memory. Pressing this button
again undoes the recalling and returns to the previous setup.
[Example] When two settings of measurement are switched alternately, one
at a sweep rate of 2 ms and the other at a sweet rate of 200
µ
s.
1. After measurement is performed at a sweep rate of 2 ms/div, press the
SAVE button.
2. Set a sweep rate of 200
µ
s/div and carry out measurement.
3. Pressing the UNDO button recalls the panel setting at a sweep rate of 2
ms/div.
4. Pressing the UNDO button again recalls the 200
µ
s/div panel setting.
Pressing the UNDO button toggles the sweep rate between 2 ms/div and
200
µ
s/div.
How to use SAVE/UNDO of SETUP
Simply pressing these buttons saves the current panel setting to internal
memory or recalls the saved setting.
SETUP
SAVE
SETUP
UNDO
Save/recall of
reference waveform
Save/recall of panel setting
Internal memory
Saves/recalls part of
readout and menu.
(For save content,
see Document 4.)
Saves/recalls the
displayed CH1/CH2/CH3/CH4
waveforms simultaneously.