Iwatsu DS-8814, Operation Manual

Page: 7 / 141

vii
Read the following safety information.
Handling
• Set the power switch to STAND BY before connecting or disconnecting the
power cord.
Connecting or disconnecting the power cord while the power is supplied to the
instrument may cause electric shock or malfunction.
• When disconnecting the power cord from the receptacle, remove it by grasping
the plug. Do not pull on the cord itself, as doing so may damage the cord and
could result in fire or electric shock.
• Inspect all cables prior to use. Do not use any damaged cable, otherwise fire or
electric shock could result.
• Do not place any objects on this instrument.
If any objects are placed on this instrument, the cover may be deformed and the
internal circuits shorted, which could result in electrical shock, fire, or damage
to the instrument.
• Be careful not to let the container fall over during set-up and use, otherwise
electric shock, injury, or fire could result.
• Do not use the instrument if broken, otherwise electric shock or fire could result.
Contact our Homepage listed at the end of the manual or our sales distributor for
repair.
• To avoid electric shock or fire, pull out the power supply plug from the outlet for
safety if the instrument will not be used for a long time.
Carrying the instrument
• Dropping the instrument could result in human injury or instrument failure. Be
careful not to drop the instrument and always firmly grasp the middle of the
handle.
(1) Disconnect the cables.
1. Disconnect the power cord and bundle it.
2. Turn counterclockwise and disconnect the connector
of the probe.
(2) Grasp the handle.
1. Raise the handle.
2. Grasp the middle of the handle when carrying
the instrument.
Cautions
+9#657 &+)+6#.15%+..15%12'&5