Iwatsu DS-8814, Operation Manual

Page: 110 / 141

91
Interfacing
RS-232C
Baud rate 2.4 k, 4.8 k, 9.6 k, 19.2 k, 38.4 k, 57.6 k, 115.2 k
Data bits 7 bits or 8 bits
Parity None (fixed)
Delimiter Select from LF or CR/LF
GP-IB (Option) DS-539 GP-IB Cable
Address 0 to 30
Delimiter LF, CR/LF
Panel setting/waveform data save/recall
SETUP
SAVE/UNDO function Save/undo (internal memory) of panel setting using
single key
REF
SAVE/CLEAR function Display/erasure (internal memory) of reference
waveform using single key
SAVE/RECALL function
Medium ATA card, floppy disk
Data type Panel setting, waveform data (CH1, CH2, CH3 and CH4
simultaneously)
Record format Waveform data selectable from binary or ASCII
Only binary for panel setting
Record count Per data type and record format
ATA card: Max. 9999
Floppy disk: Max. 200
Time stamp Saves time and comment simultaneously (time unit: sec)
Auto Save function Saves waveform data for every acquisition of waveform
Hard Coping
Type of copy devices Built-in printer, Floppy Disk, ATA Card
Output source Screen, panel setting
Auto Copy function Outputs screen hard copy for every acquisition of
waveform
Internal printer
Type Line Thermal Printer
Paper width 80 mm
×
48 , 75microns, Thermal paper
Paper feed Available
Roll print Available
Floppy, ATA Card
Format TIFF, BMP
Record count Per data type and record format
ATA card: Max. 9999
Floppy disk: Max. 200
φ