Iwatsu DS-8814, Operation Manual

Page: 24 / 141

5
[Example] Set “Scale” to “Grid” in the Display menu.
(1) Selection method with FUNCTION
1. Press the DISPLAY button to show the display menu.
2. Turn the FUNCTION knob to select .
3. Press the FUNCTION knob to fix the menu item.
The setting item is displayed in reverse video.
4. Turn the FUNCTION knob to select
.
5. Press the FUNCTION knob to fix the setting item.
The selected menu item is displayed in reverse video.
Menu (FUNCTION) operation
(2) Selection method with MENU
1. Press the DISPLAY button to show the display menu.
2. Turn the FUNCTION knob to select
.
3. Pressing the DISPLAY button selects Frame, Grid or Axes.
Setting a numerical value
There are two ways of selecting a setting item in the menu; one is to turn the FUNCTION
knob to select an item, and then press the knob to fix it, and the other is to fix the item
by pressing the menu button while the item is displayed.
Set the numerical value of Hold off in the trigger menu, Interval of
Event trigger or Line of TV as follows:
For the setting of File No. in SAVE/RECALL, Copy menu, see pages
36 to 39.
←
Tthe numerical value steps, in rough or fine steps, are changed as
the following figure.
From the following explanations, (a series of operations 2 to 5 enclosed with
dotted line above) is expressed as follows:
Through [FUNCTION operation], set Scale menu to Grid.
Bear in mind!!
Hold off
Fine value
settable
Coarse
Coarse value
settable
Pressing FUNCTION knob