v
Operation
• Make sure no water gets on or inside the product
• Do not use the product if wet, otherwise electric shock or fire could result. If
water gets on or inside the unit, turn the power switch to STBY and remove the
power cord. Immediately contact our Homepage listed at the end of this manual
or our sales distributor.
• Do not touch the plug of the power cord with wet hands, otherwise electric
shock could result.
• Operate the instrument on a stable platform. Do not place the instrument on an
unstable support. Dropping the instrument during operation could result in electric
shock, injury, or fire. If the instrument is dropped, turn the power switch to
STBY and remove the power cord. Immediately contact our Homepage listed at
the end of the manual or our sales distributor.
• Do not remove the chassis covers or rear panel. Removing covers exposes lethal
high-voltage circuits within and could result in electric shock.
Please contact our Homepage listed at the end of the manual or our sales
distributor for inspection, calibration, or repair.
• Do not modify this instrument. Modification of this instrument could result in
electric shock, fire, or power failure, and repair of a modified instrument may be
refused.
• Do not operate the instrument in conditions where foreign particles such as metals
or inflammables could pass through the ventilation holes. Operation under these
conditions could result in fire, electric shock, or instrument damage. If any foreign
matter has contaminated the unit, turn the power switch to STBY and remove
the power cord. Immediately contact our Homepage listed at the end of the
manual or our sales distributor.
Warnings
Read the following safety information.
Summary of Contents for DS-8814
