Iwatsu DS-8814, Operation Manual

Page: 55 / 141

36
SAVE/RECALL menu
SAVE/
RECALL
Device
setting
Type
setting
Function
Style
setting
Saves and recalls SETUP (panel setting) and WAVEFORM (waveform
data) to a floppy disk or ATA card. The CH1, CH2, CH3 and CH4
waveforms are saved simultaneously. Both the panel setting and the
waveform data are recalled simultaneously.
Selects a floppy disk or ATA card. (When a device is selected, the free
capacity of the selected device is checked, and then it is displayed.)
Selects Setup (panel setting) or Waveform (waveform data).
Note: Select the Style (next item) when selecting the waveform.
Selects Binary or ASCII. The Style of the panel settings is Binary format.
Note: There is a setting item at the end of the Save/Recall menu.
Selects Save, Recall or Delete.
Execute the function by specifying file No.
Setup
: Saves, recalls or deletes panel settings in Binary
format.
The file extension is set.
WAVE : Saves, recalls or deletes waveform data in Binary
format.
The file extension is wfm.
ASCII : Saves or deletes waveform data in ASCII format.
The file extension is csv.
The above directory is automatically created when save is executed, and
the data is saved as the specified file number.
The selected file is found automatically from the above directory, and is
recalled or deleted when Recall or Delete is executed.
Step
setting
When saving the waveforms (waveform data) in the ASCII format, the
waveform data can be saved with it curtailed. A curtailed interval is
selected from 1, 2, 4, 8, 16, 32, 64, and 128. If Step is set to 1, all of the
waveform data can be saved.
Example: Head
♦◊◊◊♦◊◊◊♦◊◊◊♦◊◊◊
...........
◊◊♦◊◊◊
Tail
Specify 4, and the
♦
s above will be saved.
Saves/recalls the CH1/CH2/CH3/CH4
waveforms irrespective of display ON/OFF.
Saves/recalls part of the readout
and menu. (For save content,
see the appendix 4.)
Binary ASCII
can be selected
as data format.