Iwatsu DS-8814, Operation Manual

Page: 57 / 141

38
Saving waveform to floppy disk
Recalling waveform data from floppy disk
Operation during floppy disk access
1 to 4. Set in the same way as saving waveform data to floppy disk.
5. Select Recall in Function with [Function operation].
6. Specify the File No. with [Function operation] (e.g. specify “1”).
All saved files are displayed. When the waveform data is recalled,
only file No. of files in which the data was saved are selected and
displayed.
You can set the file No. in steps of 10 when Course is set.
If there is no file, “*****” is displayed.
7. After specifying the File No., press the FUNCTION knob. The
message “Press FUNCTION to recall” appears. Press the knob
again to execute RECALL.
1. Press the SAVE/RECALL button to display the SAVE/RECALL
menu.
2. Set Device to Floppy with [Function operation].
3. Set Type to Waveform with [Function operation].
4. Set Style to Binary with [Function operation].
5. Set Function to Save with [Function operation].
6. Specify the File No. with [Function operation] (e.g. specify “1”).
You can set the file No. in steps of 10 when Course is set.
7. After specifying the File No., press the FUNCTION knob.
The message “Press the FUNCTION knob to save” appears.
Press the knob again to execute SAVE.
If the specified file already exists, the message “Press the
FUNCTION knob again to overwrite” appears.
Press the FUNCTION knob again.
Saving or recalling waveform data saves or recalls the CH1, CH2, CH3
and CH4 waveform data at the same time without any relation to whether
trace is ON or OFF with Binary. With ASCII sees page 71.
Saving or recalling waveform data
Do not operate any other function while the scope is accessing the floppy
disk (green lamp is lit).