Iwatsu DS-8814, Operation Manual

Page: 25 / 141

6
[MENU] button : Displays the ACQUISITION, DISPLAY,
MEASURE, SAVE/RECALL and UTILITIES menus.
[FUNCTION] knob
: Selects and fixes an item on the menu
screen and controls the V/H cursor position during cursor
measurement. (P5)
[
∆
V/
∆
t/
∆
V&
∆
t/V at t/ Off] button : Selects the cursor
measurement item from
∆
V
→ ∆
t
→ ∆
V/
∆
t
→
V at t
→
Off. The selected item is displayed at the top of the cursor
menu. (P22)
[C1/C2/TCK] button : Selects active cursors (C1, C2, or
tracking) to be moved by the FUNCTION knob C1;
Reference cursor, C2; Difference. (P22)
[TRIG MENU] button : Displays the TRIGGER menu. (P18)
[TRIG LEVEL] knob : Sets the trigger level. (P18)
[AUTO/NORM/SGL] button : Selects the sweep mode from
Auto
→
Normal
→
Single. (P20)
Description of operation section
Shown in ( ) is the reference page.
[MENU] button
: Displays the CH1,CH2, CH3
and CH4 menus. (P14, P15, P44, P45)
[SELECT] button: Every time the SELECT
button is pressed, the channel to be operated
with CH1 and CH2 or CH3 and CH4 is
changed. (P14)
[OFFSET] knob
: Sets the vertical position of a
trace. (P14)
[VOLTS/DIV] knob : Continuously selects the deflection factor in 1-2-5 sequence or ´1 to
´2.5 zoom as fine adjustment of the vertical gain sensitivity. Pressing the knob switches
between 1-2-5 sequence and zoom. (P14)
ENTER
ACQUISITION
FUNCTION
DISPLAY
MEASURE
SAVE/RECALL
UTILITIES
v/ t/ v& t
/v at t/OFF
C1/C2/TCK
- +
TRIG LEVEL
COARSE
MENU
AUTO/NORM/SGL
OFFSET
MENU
V mV
SELECT
VOLTS/DIV
COARSE ZOOM