11-13
Video Illuminators
Figure 103: Bring up Process Camera Illumination Control Panel
Note:
Write down or take note of the existing illumination parameter values before setting them to 0%.
They will need to be re-entered after the illuminator has been replaced.
2. Turn the illuminator’s twist-lock cable connector counter-clockwise and pull the
power/signal cable out of the illuminator’s socket. Refer to Figure 101,
Adjusting
the Process Camera Illuminator
, on page 11-11.
3. Loosen the two M4 Allen rotational locking screws in the illuminator collar.
4. Push the illuminator out of the collar.
Programmable Lighting Controller
The programmable lighting controller is the interface between the workstation
computer and the video illuminators. It receives control data from the IX workstation
software to automate the lighting of the process and inspection cameras.
d
b
c
c
Summary of Contents for IX-6168-PS
