IPG IX-6168-PS, Hardware Reference Manual

Page: 71 / 136

7-5
Operator Controls
Front-Panel Controls
Several controls and indicators are mounted on the front panel of the workstation:
Figure 61: Front Panel Controls
Control or Indicator Description
EMERGENCY STOP
button Immediately cuts off power to specified devices. Refer to
"Starting and Shutting Down" Chapter 3.
SYSTEM POWER ON
button Turns on the system (when the AC disconnect switch is on)
and resets the safety relays after an E-stop has occurred.
SYSTEM POWER OFF
button Turns off the system.
BEAM STOP OPEN
indicator Lights when the beam stop is open.
BEAM STOP CLOSE /OPEN
switch
Closes or opens the beam stop only when the system is in
service mode.
MANUAL OVERRIDE ENABLED
indicator (service mode)
Lights when the system is in service mode.
NORMAL / SERVICE
mode

key switch
Switches between normal and service modes;

key is removable only in normal mode.
LASER
indicator Lights when the laser is firing on DPSS laser systems.
Emergency Stop Button
System Power On
Button
Beam Stop Open
Indicator
Manual Override
Enabled Indicator
(service mode)
Laser Indicator
or
Laser Reset Button
System Power Off Button
Beam Stop Close / Open
Switch
Normal/ Service Mode

Key Switch