IPG IX-6168-PS, Hardware Reference Manual, Page: 119 / 136

11-11
Video Illuminators
✧
To rotate the illuminator toward or away from the camera, loosen the two M4
rotation adjustment screws, make the adjustment, and retighten the screws.
Figure 101: Adjusting the Process Camera Illuminator
The LEDs in the process illuminator have a very long life but will eventually need to
be replaced.
To replace the Process Camera Video Illuminator:
1. Turn off the power to the illuminator.

The IX-6168-LUM is equipped with the programmable lighting controller option,
therefore this operation needs to be done in the workstation’s software. Refer to
the included IX Series Laser Workstation Setup and Operation: Chroma.NET
manual (part # MAN-1) for more instructions on programming the video camera
illuminators.
a. Click the “Main” icon in the lower left corner of the main workstation screen,
and click “Process” under the “Camera View” tab.
M5
Position
Adjustment
Bolt
M4
Rotation
Adjustment
Screw (2)
Twist-Lock
Cable
Connector