IPG IX-6168-PS, Hardware Reference Manual

Page: 38 / 136

Starting and Shutting Down
3-6
9. Pull down and select the desired amount of time before Auto Logout occurs.
Figure 23: Login and Auto Logout Control Screen
After a Service Shutdown
After a service shutdown (described on page 3-3), the system is disconnected from
electric power.
To start after a service shutdown:
1. Make sure all switches are ready for power-up.
2. Turn on the main AC disconnect switch. The red Mains light turns on.
3. Press the green
Power On
button on the front of the workstation. The computer
and internal electronic systems start up.
4. Log on to Windows with user name
Operator
. The factory-set password is
1
.
5. Start the IPG Photonics software by double-clicking their icons on the desktop.
6. In the IPG Photonics User Access Control dialog box, log in with the assigned user
name and password. Factory settings let you log in using
Operator
, password
1
.
Switch Location Setting
Main AC disconnect switch Left side of workstation
Off
AC circuit breakers Inside back door of workstation
On
Emergency Stop buttons Front panel and inside back door
Pulled out