Electronic and Computer Components
7-4
Ethernet Switch
An 8-port gigabit Ethernet switch is located inside the upper left corner of the laser
bay. Refer to Figure 60 for its location. Its function is to switch and interface the
process and inspection digital cameras to the system computer.
The power is 24VDC supplied from the electronics box, and is secured with a double
protection mechanism.
Note:
This Ethernet bus is completely independent from the LAN Ethernet bus that interfaces the
IX-6168-LUM system computer to the facility’s LAN. Refer to
Figure 70,
A Typical Customer
Interface Panel, on page 7-19
.
Figure 60: 8-Port Gigabit Ethernet Switch
Summary of Contents for IX-6168-PS
