69
30.10.1 Programming auto-answer
The PABX releases auto-answer and maintains the call
Lift the main extension handset, pess
+
MAIN PA
+ LINE +
, wait for confirmation tone.
If the caller enter the wrong number or simly does not enter any number after the auto-
answer, the PABX will not disconnect the call but rather transfer it to the Line Attendant.
The PABX releases auto-answer and disconnects the call
Lift the main extension handset, pess
+
MAIN PA
+ LINE +
, wait for confirmation tone.
If the caller enter the wrong number or simly does not enter any number after the auto-
answer, the PABX will disconnect the call.
Desactivating auto-answer
Lift the main extension handset, pess
+
MAIN PA
+ LINE +
, wait for confirmation tone.
30.10.2 Calling a PABX with auto-answer
Using a decadic phone
wait for your call to be answer by the extension programmed as attendant, the
decadic mode does not allow for direct access to extension.
Using a multifrequencial phone
Choose one of the below options or just wait for your call to be answered by the
extension set as attendant:
Enter EXTENSION Nº;
Press
+
GROUP
(1 to 4) for group of extensions;
Press
to activate an external operation;
Press
+ MAIN PASSWORD + DESIRED PROGRAMMING CODE - for remote
programming.
Remote programming can only be carried out after altering the main PABX password.
NOTE
- The PABX detects the incoming call, sends three (3) beeps and wait for the caller to
dial the extension number.
Once programmed,
when a call
exceeds the
allowed time, the
PABX disconnects
the call.
If the programmed
duration of your
call is achieved,
you receive 7
beeps 15 seconds
before the call is
disconnected.
