22
Setting the PABX to analyse the local digits
Lift handset, press
+
MAIN PA
+
LINE +
+ LOCAL
DIGIT NUMBER (7 to 9), wait for confirmation tone.
2.9 Blocking collect call
Factory setting : Activated for daymode and night mode.
Blocking day mode Collect Call
Lift handset, press
+
MAIN PA
+
LINE +
, wait for
confirmation tone.
Blocking night mode Collect Call
Lift handset, press
+
MAIN PA
+
LINE +
, wait for
confirmation tone.
Releasing day mode collect call
Lift handset, press
+
MAIN PASSWORD +
+
LINE +
, wait for
confirmation tone.
Releasing night mode Collect Call
Lift handset, press
+
MAIN PA
+
LINE +
, wait for
confirmation tone.
Example: You want to prevent all lines from receiving collect calls during nightmode.
While in main programming, press 4 + 9 + 831.
2.10 Auto-answer
Factory setting: Extension 20 programmed to auto-answer; 35 seconds overflow time,
afterwhich the call will be answered by extension 21.
All incoming calls will be answered by the set extension (operator); if the call is not
answered after 35 seconds, it will be forwarded to the second extension (overflow
extension). See the following options on how to program your PABX.
2.10.1 Auto-answer in day mode
Factory setting: Extension 20 programmed to auto-answer.
LINE:
1, 2, 3 or 4,
as per the line you
want to program or
9 to program all the
lines.
This configuration
allows you to either
block or release
incoming call
collect for normal
or night mode
service.
