63
Connect the interface to CN22.
Follow the programming steps in
35 for proper operation.
See the ITA 700 manual for more
information.
To activate emergency call using
an external device, connect the
wires of the ITA 700 too CN22
and interconnect the key contact
in SALMA and SALMB.
Follow the instructions in 30.11
.
for proper operation. The
communication board is required
if an external number is
programmed to answer the
emergency call.
29.7 External activation interface ITA 700
The ITA 700 allows you to control an external device such as bell, alarm, doorlock, etc., from any extension
or automatically at pre-programmed hours.
29.8 Emergency call device
With the ITA 700 you can activate emergency call feature through an extension or external device with
contact key ( opened ).This call will be forwarded to to an extension or pre-programmed external call.
