76
31. DISA BOARD - AUTO ANSWER
31.1 Description
Default factory setting: No activated
This feature offers the possibility to directly access an extension whitout going through
the operator or the extension programmed as attendant.
31.1.1 Programming the feature
The PABX releases auto-answer and maintains the call
Lift the main extension handset, press
+
MAIN PA
+ LINE +
, wait for confirmation tone.
If the caller enter the wrong number or simply does not enter any number after the auto-
answer, the PABX will not disconnect the call but rather transfer it to the Line attendant.
The PABX releases auto-answer and disconnects the call
Lift the main extension handset, press
+
MAIN PA
+ LINE +
, wait for confirmation tone.
If the caller enter the wrong number or simly does not enter any number after the auto-
answer, the PABX will disconnect the call.
Desactivating auto-answer
Lift the main extension handset, press
+
MAIN PA
+ LINE +
, wait for confirmation tone.
31.1.2 Incoming Calls answered by DISA
Default factory setting: Desactivated
−
The PABX detects the call and emits three (3) beeps;
−
Wait for the caller to dial for direct extension access.
Situations where the call is answered by the required extension
−
Calling from a MF phone and entering the extension number. The extension ring
sound will be long.
−
Destination extension is not answering or unavailable, the call will be diverted to the
operator after 30 seconds.
You can program
any type of call
log report, such
as missed calls
without the need
to program the
log for outgoing
calls.
