2
Step 1
Leaving a
minimum distance
of 1,45 mtr from
the floor; mark the
point to drill. When
done, insert
the anchor plug
and the screw
(leaving 1/2 cm of
the head off the
wall).
Step 5
Remove the
PABX base, drill
the hole and
then insert the
anchor plug.
Step 2
Hook the
PABX base
onto the
screw head.
Step 3
Push the PABX
base downwards
until the screw
head fits into the
base mount.
Step 4
Aline the
PABX base
and mark
the spot for
the second
drill.
Step 6
Hook the
PABX base
again onto the
upper screw
head, aline
with the lower
hole, and
fasten the
second screw.
1.2 Mounting your PABX on the wall