26
number (9 = call category).
For caller ID without category, only extension number is displayed.
Category sent to DTMF CID phones connected to extension programmed with
Extension Caller ID
activated.
1 - Regular Subscriber
2 - Special Billing or Celular
3 - PSTN Testing Terminal
4 - Local Public Phone
5 - Operator
6 - Reservation (NO UTILIZED)
7 - Interurban Public Phone
8 - Reservation (NO UTILIZED)
9 - Extension PABX Intelbras
0 - Outgoing call PABX Intelbras
Setting incoming call identification
Lift handset, press
+
MAIN PASSWORD +
+ LINE +
+
RINGING N
O
(0 to 1), wait for confirmation tone.
2.12 Dial tone timing
You can set the maximum time ( en seconds ) your PABX wait to dial an external
number. You can also define that after this time your PABX can consider the call as
through or drop it.
The
Dial Tone Time (DTT)
will be equivalent to 5 times the value used in the
program setting. Example: If you program 10 as Dial tone, this will generate 50
seconds of waiting time.
In places where the Dial Tone has a time gap before being heard, you need to
evaluate its time and then set a value higher than what you have evaluated; this
time will be counted after lifting the handset before dialing any number.
2.12.1 Answer a call after DTT
Factory setting: 07 (35 seconds) to answer the call after the dial tone.
Lift handset, press
+
MAIN PA
+ LINE +
+ TIME - 06
to 90 (30 to 450), wait fo confirmation tone.
2.12.2 Drop the call after DTT
Factory setting: PABX does not drop the call after dial tone.
LINE:
1, 2, 3 or 4,
as per the line you
want to program, or
9 to program all the
lines at once.