68
30.8 Message signal for unanswered calls
Factory setting : The leds of all key telephone systems are not programmed to flash when
there are unanswered calls.
Setting the LEDs not to signal
Lift the main extension handset, press
+
MAIN PA
,
wait for confirmation tone.
Setting the LEDs to signal
Lift the main extension handset, press
+
MAIN PA
,
wait for confirmation tone.
30.9 Extension call timer
Factory setting: No extension programmed.
When setting the maximum time allowed for an incoming or outgoing call, the PABX
starts counting the minutes ingoring the seconds. If the maximum time programmed
for an incoming or outgoing call is 5 minutes and you established or received the call
at 17:40:30, the call will be disconnected at 17:45:00.
Seting the maximum time for outgoing calls
Lift the main extension handset, press
+
MAIN PASSWORD +
+
MINUTES (01 to 59) + EXTENSION N
o
, wait for confirmation tone.
To reset
Lift the main extension handset, press
+
MAIN PASSWORD +
+
+ EXTENSION N
o
, wait for confirmation tone.
Seting the maximum time for incoming calls
Lift the main extension handset, press
+
MAIN PASSWORD +
+
MINUTES (01 to 59) + EXTENSION N
o
, wait for confirmation tone.
To reset
Lift the main extension handset, press
+
MAIN PASSWORD +
+
+ EXTENSION N
o
, wait for confirmation tone.
30.10 DISA - Auto-Answer
Default factory setting: No auto-answer programmed
.
This feature allows you to direct incoming calls directly to the specified extension
without going through the operator, and just by dialing the extension number.
When day mode
starts the PABX
exits automatically
the night mode
service. You can
program up to 12
periods as per the
activation order.
