57
28.6 Transferring a call to another PABX
Factory setting: Desactivated.
If your carrier offers SPC - Stored Program Control, you can use your extension to
transfer a call to another PABX by entering the PABX access code followed by the
SPC code. This feature should be programmed in the PABX interconneted as sub-
system.
Enabling the access
Lift the main extension handset, press
+
MAIN PA
,
wait for confirmation tone.
Desabling the access feature
Lift the main extension handset, press
+
MAIN PA
,
wait for confirmation tone.
Example: To activate the access, enter in main programming, press 281.
28.6.1 Using the SPC feature during an external call
Press FLASH +
, wait for line tone +MAIN EXTENSION Nº or SPC codes.
28.6.3 Flash time
Factory setting: 200 ms.
Setting the flash time for your telephone line
Lift the main extension handset, press
+
MAIN PA
+
TIME - 1 to 9 (100 to 900 ms), wait for confirmation tone.
When a PABX is
interconnected as
sub-system, it can
transfer all calls and
use all features
offered by the main
PABX.
This featue can only
be activated in
multifrequencial
mode.
