24
overflow auto-answer; external call category; Intrude access category; category for external call
through special route and route 0; access category for doorphone; external activation access
category; automatic auto-answer and collect call blocking.
Activating night mode service
Lift handset, press
, wait for confirmation tone.
Desactivating night mode service
Lift handset, press
, wait for confirmation tone.
Note :
- With the communication board installed, you can set your PABX to enter and exit night mode
service everyday at the same time. See 30.5;
- Once night mode service is set, the extensions will assume night mode categories already
defined;
- When night mode services is desactivated, all incoming calls will be answered by the extension
operator, and the extensions will assume the regular categories determined by the day mode
service.
2.10.4 Overflow auto-answer
Factory setting: Extension 21.
You can determine an extension or a group to answer incoming calls in case they are not
answerd by the extension or nightmode service. The call will ring on this extension or group after
the overflow time.
Setting an extension as overflow auto-answer
Lift handset, press
+
MAIN PA
+
LINE +
+ EXTENSION N
O
, wait for
confirmation tone.
Setting a group as overflow auto-answer
Lift handset, press
+
MAIN PA
+
LINE +
+
+ GROUP N
O
(1 to 4),
wait for confirmation tone.
Setting sequencial ring as overflow auto-answer
Lift handset, press
+
MAIN PA
+
LINE +
, wait for confirmation
tone.
When set, you need to program the extensions to receive the sequencial ring call (extensions 20,
21, 22, 23 and 24 are preset the receive sequencial ring calls).
Activating the sequencial ring call reception for an extension:
Lift handset, press
, from the extension receiving sequencial ring, wait for confirmation
tone.
Desactivating the sequencial ring call reception for an extension :
Lift handset, press
, from the extension receiving sequencial ring, wait for confirmation