40
26; if again there is no answer, the call comes back again to 21.
Multiple ring
The incoming call is forwarded to all extensions of the group at the same time and
anyone can answer just by lifting the handset. The intercom forwarded to this type
of groups will have the same characteristics described for an hierarchic group. If
this group receive an incoming call, either transfered or not, and all extensions are
busy, the call is transfered to the first extension receiving beeps.
15.2 Programming the groups
You can create a group, determine type (forwarder, hierarchic or multiple ring), as well
as determine the number of time the extension rings before being forwarded to the
group.
From the main extension, lift handset, press
+
MAIN PA
+
GROUP Nº
( 1, 2, 3 or 4) +
Nº OF RINGS (3 to 7) + TYPE OF GROUP (1
forwarder; 2 hierarchic and 3 multiple ring), wait for confirmation tone. Afterwards, you
need to add the extensions belonging to the group.
Adding an extension
From the main extension, lift handset, press
+
MAIN PA
+ GROUP Nº
(1 to 4)
+
+ EXTENSION Nº,
wait for confirmation
tone. You should follow these steps to add all the desired extensions.
Removing an extension
From the main extension, lift handset, press
+
MAIN PA
+ GROUP Nº
(1 to 4)
+
+ EXTENSION Nº,
wait for confirmation
tone.
You should follow these steps to remove all the desired extensions.
Cancelling all the group
From the main extension, lift handset, press
+
MAIN PA
+GROUP Nº, wait for confirmation tone.
15.3 Calling a group
Press
+ GROUP Nº (1 to 4),
wait for confirmation tone.
