72
30.12.3 Desactivating emergency call feature
Lift the main extension handset, press
+
MAIN PA
,
wait for confirmation tone.
30.13 External number call back
This feature is available in two situations:
❖
When you receive a busy tone while accessing the external line;
❖
After dialing the external number and receive a busy tone.
PABX line is busy
Enter the EXTERNAL LINE ACCESS CODE, if you receive a busy tone, press
or
, followed by the EXTERNAL NUMBER.
External number is busy or not answering (only for MF phones)
After dialing the external number, press FLASH
. when the programmed number
is called, the PABX will automatically call your extension.
Cancelling call back (only for MF phones)
Lift handset, press
and wait for confirmation tone.
Important
- You can program the time and the number of times to redial the external number,
The following shows how o program this feature
.
30.13.1 Time interval between each redial
Default factory setting: 1 minute.
Lift the main extension handset, press
+ MAIN PA
+
TIME (1 to 9 minutes), wait for confirmation tone.
30.13.2 Number of times to redial an external number
Default factory setting: 9 times.
Lift the main extension handset, press
+ MAIN PA
+
No of redials (1 to 9), wait for confirmation tone.
Remote
programming can
only be done once
the PABX password
has been changed.
The PABX permits
the reception of
incoming calls
directly to the
extension. You can
then block or
release your
extension deciding
whether the calls
go through the
operator or not.
When you carry out
2 or more
programming
operations in
sequence, the
commande to enter
in PABX program
mode should only
be entered once
(# + password - 3
digits).
