Intel IXP2400, User Manual

Page: 101 / 320

Development Tools User’s Manual 101
IXP2400/IXP2800 Network Processors
Developer Workbench
2.12.7 Creating an IP Packet Pool
In the ATM data stream, you can create IP Packet Pools. Do the following:
1. Create an ATM data stream.
2. Create a PDU.
3. In the Create AAL5 PDU dialog box, click Multiple packets from pool in the lower-left
corner.
4. Click Create Pool .
The IP Packet Pool dialog box appears.
5. Click Create Packet(s) .
The IP Packet dialog box appears.
6. Click IP Header (see Section 2.12.9 ).
7. Click Payload (see Section 2.12.11 ).
You can specify a fixed packet size or, if you are creating multiple packets, a size which is
randomly selected from within a specified range or which is incremented within a specified
range.
8. Specify the number of packets you want to create
9. Click Create .
The created packets are added to the pool. The dialog box remains active so you can change
settings and create additional packets.
10. When you are finished creating packets, click Close .
To delete a packet:
1. Click the packet you want to delete.
2. Click Delete Packet .
To edit a packet:
1. Click the packet you want to edit.
2. Click Edit Packet .
To change the order of the packets:
1. Click a packet.
2. Click the up or down arrow buttons to move the frame up or down in the list.
When you are finished creating the packet pool:
1. Click OK .
The Specify File... dialog box appears.
2. Browse to the folder where you want to store the file.
3. Type the name of the file in the File Name box.
4. Click Save .
The packet pool that you just created appears in the Select packet pool... box.