Intel IXP2400, User Manual

Page: 97 / 320

Development Tools User’s Manual 97
IXP2400/IXP2800 Network Processors
Developer Workbench
2.12.4 Creating and Editing an Ethernet IP Data Stream
Create:
1. On the Simulation menu, click Data Streams... .
The Data Streams dialog box appears.
2. Click Create Stream .
The Create Stream dialog box appears.
3. Type the name of the stream in the Stream name box.
4. Select Ethernet IP from the Stream type list.
5. Click Continue .
The Ethernet IP Data Stream dialog box appears.
6. Type a new name in the Stream name box if you want to change it.
To create one or more frames:
1. Click Create Frame(s) .
2. Click Ethernet Header (go to Section 2.12.8 ).
3. Click IP Header (go to Section 2.12.9 ).
4. Click Data Payload (go to Section 2.12.11 ).
5. Specify the frame size in the Frame size (in bytes) area (see Section 2.12.12 ).
6. Type the number of frames you want to create in the Number of new... box.
7. Click Create .
The number of frames you specified are created and added to the data stream. The dialog box
remains active so you can change settings and create additional frames.
8. When you are finished creating frames click Close .
9. When you are finished creating the data stream, click OK .
The Save dialog box appears.
10. Type in the file name if you want to change it.
11. Browse to the folder where you want to save the file.
12. Click Save .
13. In the Data Streams dialog box, click OK.
Edit:
To edit an Ethernet IP data stream:
1. On the Simulation menu, click Data Streams... .
The Data Streams dialog box appears.
2. Select stream that you want to edit.
3. Click Edit Stream .
The Ethernet IP Data Stream dialog box appears.
4. Click Create Frame(s) to create a new frame.