Intel IXP2400 User Manual Download

Page: 23 / 320

Development Tools User’s Manual

IXP2400/IXP2800 Network Processors

Developer Workbench

2.2.3.2

Renaming Toolbars

You can rename toolbars that you have created.

To rename a toolbar:

1. On the

Tools

menu, click

Customize

The

Customize

dialog box appears.

2. Click the

Toolbars

tab.

3. Select the desired toolbar in the

Toolbars

list.

4. Edit the name in the

Toolbar Name

box at the bottom.

5. Click

Note:

You cannot rename the GUI’s default toolbars (Menu bar, File, Debug, Build, Edit, View).

2.2.3.3

Deleting Toolbars

To delete a toolbar you have created:

1. On the

Tools

menu, click

Customize

The

Customize

dialog box appears.

2. Click the

Toolbars

tab.

3. Select the toolbar to delete in the

Toolbars

list.

4. Click

Delete

Note:

You cannot delete the GUI’s default toolbars (Menu bar, File, Debug, Build, Edit, View).

2.2.3.4

Adding and Removing Toolbar Buttons and Controls

To customize the buttons on the toolbars:

1. On the

Tools

menu, click

Customize

The

Customize

dialog box appears.

2. Click the

Commands

tab.

3. From the

Categories

list, select a command category.

A set of toolbar buttons for that category appears in the

Buttons

area.

To get a description of the command associated with a button, click the button. The description
appears in the

Description

area at the bottom of the dialog box.

4. To place a button in a toolbar, drag the button to a location on a toolbar.

5. To remove a button from a toolbar, drag the button into the dialog box.

6. Click

when done.

Summary of Contents for IXP2400

































































































































































































































































































































Search results

Summary of Contents for IXP2400

Reviews:

Related manuals for IXP2400

Brands by name

Popular brands

Intel IXP2400, User Manual

Search results

Summary of Contents for IXP2400

Reviews:

Related manuals for IXP2400

Brands by name

Popular brands