Intel IXP2400 User Manual Download Page 24

Page: 24 / 320

Development Tools User’s Manual

IXP2400/IXP2800 Network Processors
Developer Workbench

2.2.3.5

Customizing Menus

You can change the appearance of the main menu or you can put menus on toolbars.

Main Menu Appearance:

To change the order of the main menu items:

1. On the

Tools

menu, click

Customize

The

Customize

dialog box appears.

2. Drag any main menu item to the new position on the main menu bar. For example, drag File

and drop it after Help.

3. To remove a menu from the main menu bar, drag it into the work area below.

4. To add a menu to the main menu bar:

a. In the

Customize

dialog box, click the

Commands

tab.

b. Click

Menu

in the

Commands

box.

All the menus appear in the

Buttons

box.

c. Select a menu and drag it to the main menu bar.

That menu then becomes a new menu on the main menu bar.

Menus on Toolbars:

To put a menu on a toolbar:

1. In the

Customize

dialog box, click the

Commands

tab.

2. Click

Menu

in the

Categories

box.

All the menus appear in the

Buttons

box.

3. Drag any menu to any toolbar.

Note:

You can put your most used or favorite menus on a floating
toolbar by creating a new toolbar (see example at right) and
dragging the menus to that toolbar.

2.2.3.6

Returning to Default Toolbar Settings

To set toolbars to their default configurations:

1. On the

Tools

menu, click

Customize

The

Customize

dialog box appears.

2. Click the

Toolbars

tab.

3. Select the desired toolbar and click

Reset

Only the Workbench default toolbars can be reset.

Summary of Contents for IXP2400

































































































































































































































































































































Search results

Summary of Contents for IXP2400

Reviews:

Brands by name

Popular brands

Intel IXP2400, User Manual

Search results

Summary of Contents for IXP2400

Reviews:

Brands by name

Popular brands