manualshive.com logo in svg

Intel IXP2400, User Manual

Share
Download
Intel IXP2400 User Manual Download Page 181

Development Tools User’s Guide  

181

Intel

®

 IXP2400/IXP2800 Network Processors

Performance Monitoring Unit

3.4.2.2

Random Based Sampling (RBS)

The RBS tab (see 

Figure 60

.) is used to configure, save and run random based sampling tests. 

Figure 60. Random Based Sampling Property Page

Table 5.  RBS Property Page Entries and Buttons

Type

Description

Output File

The 

Output File

 field is used to select where the sampled data file should be placed. 

The 

Browse…

 button exposes available filters to supported file formats.

Selected Macros

The 

Selected Macros

 text box displays a list of sampling macros selected by the user.

Window (

µ

s)

A 

Window 

is used to specify the amount of time that performance counters are 

enabled. The counters are issued START commands at the beginning of the window. A 
STOP command is issued at the end of the window, where the value is then sampled.

This value is expressed in microseconds.

Random Range

Random Range is used to vary the random time between sample Windows, as 
described in 

Section 3.3.2

. The default value is 2, which gives an average period (not 

including the Window time) of approximately 430

µ

S, for a 300MHz clock.

Samples

Number of samples to be taken.

Start Delay (s)

A start delay value greater than zero has the same effect as waiting the given number 
of seconds before pressing the 

Run

 button.

Max Run Time (s)

Sampling is concluded after the 

Max Run Time.

Summary of Contents for IXP2400

































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands