Development Tools User’s Manual
127
IXP2400/IXP2800 Network Processors
Developer Workbench
2.13.9.6
Executing Multiple Cycles
All Microengines:
To run for a specified number of cycles in all Microengines, regardless of which threads are
running:
1. Select
All threads
in the list under the
Go
for
button.
2. Type the number of cycles in the box to the right of the
Go
for
button.
3. Click
Go for
.
All Microengines run until the specified thread has executed the specified number of cycles.
A Specific Thread:
To run for a specified number of cycles in a specific thread:
1. Select the thread’s entry from the list under the
Go
for
button.
2. Type the number of cycles in the box to the right of the
Go for
button.
3. Click
Go for
.
Note:
Executing multiple cycles is not supported when debugging hardware.
2.13.9.7
Running to a Specific Cycle
To run until a specified cycle count is reached:
1. Type the cycle count in the box under the
Go to cycle
button.
2. Click
Go to cycle
.
Note:
Running to a specific cycle is not supported when debugging hardware.
2.13.9.8
Running to a Label or Microword Address
To run until a specific microcode label or microword address is reached by a thread:
1. Enter the label(s) and/or address(es) into the appropriate boxes.
2. Click
Go to label/address
.
Note:
Running to a label or microword address is not supported when debugging hardware.
2.13.9.9
Running Indefinitely
To run the microcode indefinitely:
On the
Debug
menu, click
Run Control
, then click
Go
, or
Click the
button in the
Run Control
window, or
Click the
button on the
Debug
toolbar, or
