116
Development Tools User’s Manual
IXP2400/IXP2800 Network Processors
Developer Workbench
Whether or not you can select an option depends on the current thread window configuration. For
example:
•
If you have one or no thread window open, then all options are allowed.
•
If you have two thread windows open, you cannot select option (a).
•
If you have two or more thread windows open for different Microengines in the same chip, you
cannot select option (a) or (b).
•
If you have two or more thread windows open for different threads in the same Microengine,
you cannot select option (a), (b) or (c).
•
If you select an invalid option and click
OK
, the following message box appears:
— If you click
No
the option reverts to the previous selection.
— If you click
Yes
the Workbench closes the appropriate thread windows.
The activation option you select determines the behavior of the thread-selection toolbar.
•
If you select option (d), all combo boxes are disabled.
•
If you select option (c), the chip and Microengine combo boxes are disabled, allowing you to
select a different thread.
•
If you select option (b), the chip combo box is disabled, allowing you to select a different
Microengine and thread.
•
If you select option (a), all combo boxes are selected, allowing you to select a different chip,
Microengine and thread.
•
If the open project has only one chip, the chip combo box is hidden in order to save toolbar
space.
In the next area of the
Thread Window Options
dialog box:
3. Select
Track active thread in new thread windows
if desired (not available if you selected to
view each thread in its own window).
4. Select
Expand macro references when an ‘assembled’ thread is activated for the first
time
if desired.
5. Select
Show list view in new ‘compiled’ thread windows
if desired.
6. Select
Display instruction addresses
if desired (in list view only).
7. Click
OK
when done.
