Intel IXP2400 User Manual Download Page 28

Page: 28 / 320

Development Tools User’s Manual

IXP2400/IXP2800 Network Processors
Developer Workbench

2.3.2

Opening a Project

To open an existing standard project:

1. On the

File

menu, click

Open Project

The

Open Project

dialog box appears.

2. Browse to the folder that contains the project file (*.dwp) for the project you want to open.

3. Double-click the project filename or select the project filename and click

Open

Once open, the processor type is displayed in the status bar, as shown below:

You can also select a project from the most recently used list of projects, if it is one of the most
recent four projects opened.

1. On the

File

menu, click

Recent Projects

2. Click the project file from the list.

Note:

Opening a project automatically closes the currently open project, if any, after asking you if you
want to save changes if there are any.

2.3.3

Saving a Project

To save a modified project:

•

On the

File

menu, click

Save Project

This saves all project configuration information, such as debug settings to the project file. If your
project hasn’t been modified, the

Save Project

selection is unavailable. Also, on the

File

menu,

click

Save All

to save all files and the current project.

The project is saved in the folder that you specified when you created it. If you opened an existing
project, it is saved in the folder from which that you opened it.

Figure 3. Specify Debug-only UOF Files Dialog Box

Summary of Contents for IXP2400

































































































































































































































































































































Search results

Summary of Contents for IXP2400

Reviews:

Brands by name

Popular brands

Intel IXP2400, User Manual

Search results

Summary of Contents for IXP2400

Reviews:

Brands by name

Popular brands