102
Development Tools User’s Manual
IXP2400/IXP2800 Network Processors
Developer Workbench
5. Click on the name of the pool.
6. Click
Create
.
7. If done, click
Close
.
The
ATM Stream dialog
box appears.
8. Click
OK
.
2.12.8
Specifying an Ethernet Header
1. Create an Ethernet IP data stream (see
) or an Ethernet TCP/IP data stream (see
).
2. In the
Ethernet IP Data Stream
dialog box, click
Create Frames
.
3. Click
Ethernet Header
.
4. Enter values directly into the boxes.
If you are creating multiple frames and want each frame to have a different value for the
destination or source MAC address, click
Advanced
next to the appropriate address box.
The
Specify how you want...
dialog box appears. It displays options for generating MAC
addresses.
— Click
Fixed
if you want all frames to have the same address.
— Click
From within range
if you want addresses chosen from a range which you specify.
— Click
Sequential
to have addresses chosen sequentially from within the range, starting
within the range’s lower bound.
— Click
Random
for random selection of addresses from within the range.
— Click
From list
if you want addresses chosen from a list that you specify.
— Click
Sequential
to have addresses chosen sequentially from the list, starting within the
first address in the list.
— Click
Random
for random selection of addresses from the list.
— To add an address to the list either click the
button or double-click beneath the last
address in the list, enter the address value and pressing ENTER.
— To delete an address from the list, select it, then click the
button.
— To move an address up or down in the list, select it and click the
or the
button.
The list of addresses is saved in the Windows registry, so it is available during future Workbench
sessions.
2.12.9
Specifying an IP Header
1. Create an Ethernet IP data stream (see
) or an Ethernet TCP/IP data stream (see
).
2. In the
Ethernet IP Data Stream
dialog box, click
Create Frames
.
The
Create frame(s)
dialog box appears.
3. Click
IP Header
.
