manualshive.com logo in svg

Intel i960 Jx, Developer'S Manual, Page: 2 / 578

Share
Download
Intel i960 Jx Developer'S Manual Download Page 2

Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or 
otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of 
Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale 
and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or 
infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life 
saving, or life sustaining applications. 

Intel may make changes to specifications and product descriptions at any time, without notice.

Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel 
reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future 
changes to them.

The i960

®

 Jx Processor may contain design defects or errors known as errata which may cause the product to deviate from 

published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an ordering number and are referenced in this document, or other Intel literature may be 
obtained by calling 1-800-548-4725 or by visiting Intel’s website at http://www.intel.com.

Copyright © Intel Corporation, 1997

*Third-party brands and names are the property of their respective owners.

ii

May, 1998

272483-002

Summary of Contents for i960 Jx



































































































































































































































































































































































































































































































































































































Reviews:

No comments